MEIREN VTS V-PLOWS

Meiren's VTS-02 series v-plows are suitable for city streets, side roads, sidewalks, parking lots and other places where snow is collected. Plow´s blade holders are equipped with a unique shock absorption mechanism. Separately adjustable blade angle and spring tension help adjust the plow to match the road conditions and ensure smooth crossing of obstacles. V-plows use blades of standard length, and it is also possible to equip the plow with bolted corner blades. Plows can be ordered in different heights and shapes depending on the demands of the work. Thanks to different mounting solutions, the plow can be used with tractors, wheel loaders and trucks. Available series products: VTS2602, VTS2902, VTS3202, VTS3502 and VTS3802.

EQUIPMENTS FOR MEIREN V-PLOWS

traktorin-nivelaura-meiren-vts-konekorjaamo-riikonen

The new four-block blade holders with standard length blades (610 mm and 915 mm) are equipped with a shock absorption system. Thanks to the angle of the blade that can be adjusted to two positions (vertical and passive), it is possible to set the angle of the blade to suit the work area and use both steel and rubber blades. Different center blades must be used for different blade angles. For working in the city, it is recommended to use a lower wing, but it is also possible to order an asymmetric wing. The turning point of the blade holders placed on the front side of the wing guarantees the smoothest crossing of obstacles, preventing the plow from jumping and ensuring the best cleaning result.

vts-nivelaura-meiren-konekorjaamo-riikonen

EQUIPMENTS

  • Wing partly made of plastic
  • Throwing wing with standard height
  • Snow overthrow protection in the middle part of the plow
  • Pivot sylinders (2 pcs)
  • Hydraulic hoses and quick couplers ½” (male)
  • Shock-absorbing blade holders (610 mm and/or 915 mm)
  • Adjustable blade cutting angle (0° / passive)
  • The spring tension of the shock absorber must be adjusted regardless of the cutting angle
  • Attachment frame for tractor
  • Plow attachment parts according to tractor attachment type
  • Changeable middle blades
  • Meiren safety markings
  • Wear-resistant polyurethane paint, color: Meiren yellow

ACCESSORIES

  • Low wing (less throable)
  • Set of safety valve for pivot cylinders (2 protection valves + hydraulic accumulator)
  • Electric directional control valve
  • Wireless switch for directional control valve
  • LED marker lights
  • Adjustable skid shoes
  • Adjustable supprt wheels (VTS3202/ VTS3502/ VTS3802)
  • Changeable side blades
  • Blade sets by choice
  • Lifting frame for truck attachment
  • Electric directional control valve (for lifting frame)

MAIN BENEFITS OF VTS02 SERIES

  • New wing design - thanks to the new VTS series wing design, snow can be thrown even higher at higher speeds
  • Blade holders – four-piece blade holders, pivot point at the front of the plow (reduces plow jumping when crossing an obstacle)
  • Adjustable shock absorption - the tension of the shock absorption springs of each wing is adjustable (regardless of the cutting angle)
  • Adjustable cutting angle of the blades – 0° / passive and possibility of fine adjustment
  • Standard size blades - the blades used in the new VTS series are standard size, either 610 mm and/or 915 mm
  • Various attachment options – the v-plow can be used with tractors, loaders and trucks
meiren-vts-nivelaura-konekorjaamo-riikonen
TECHNICAL INFORMATIONVTS2602VTS2902VTS3202VTS3502VTS3802
Suitable for tractors/ wheel loaders with actual weight asunder 9,5 tunder 9,5 tunder 9,5 tunder 9,5 tunder 9,5 t
Overall width (total widht)2800 mm3095 mm3390 mm3690 mm4000 mm
Total width of the blades2628 mm2931 mm3236 mm3541 mm3846 mm
Min. working width of the blades*1970 mm2210 mm2455 mm2705 mm2980 mm
Max. turning angle (left/right)37°/37°37°/37°37°/37°37°/37°37°/37°
Cutting angle of the blades0°/-10°0°/-10°0°/-10°0°/-10°0°/-10°
Wing height (high)1220 mm1280 mm1280 mm1320 mm1320mm
Wing height (low)1050 mm1050 mm1050 mm1050 mm1050 mm
Weight with standard equipment660 kg685 kg715 kg765 kg820 kg
Total weight735 kg770 kg820 kg870 kg900 kg

*With steel blades

contact

Ask for more information about our products and services! Add your contact information and tell us which product/service you would like to hear more about or receive an offer. By submitting the form, you agree our privacy statement*. You can also contact us directly by phone, our contact information can be found below! 

KEIJO RIIKONEN

CEO

Gravel superstructures and trailers, work acceptance, workshop and inspection services, tires, plows

EINO HIRVONEN

PRODUCTION ENGINEER

Superstructure product development, production control

JANNE RIIHILUOMA

DESIGN ENGINEER

Superstructure product design, brake calculations

WE ALSO HAVE

en_GBEN