We are the official importer and distributor of Meiren Snow plows and underbody scrapers. Meiren Engineering Oü has been a manufacturer of snow plows and road maintenance equipment since 2003, and its certified and patented products are a sure choice for road maintenance work. We take care of all the work required for import and installation, so that you can use the equipment immediately and quickly. The lifting frame of Meiren's N-series road plow is equipped with a patented side offset, which helps to handle the plow in challenging areas and enables a working width of up to 8.5 m. The patented parallelogram allows the plow body to be moved laterally and at the same time the entire plow to be raised.
The very quiet patented blade holders made of polyurethane move smoothly over obstacles on the road surface. In the case of an obstacle, the Meiren blade holder block changes shape and moves to the rear, allowing the plow to move over the obstacle. At 40 km / h, the blade holder (up to five blade holders at a time) overcomes an obstacle up to 10 cm high without any problems. The 305 mm long blocks of the blade holders allow the use of different blade lengths (305-1200 mm).
Meiren's hydraulic 4-block auxiliary blade distributes the pressure between the front blade and the auxiliary blade. Each block has its own cylinder, which ensures equal working pressure along the entire length of the additional blade. In the case of hard snow, the entire weight of the plow is transferred to the first blade, and in the case of a snow thrower, to the additional blade equipped with a completely rubber blade. The use of the right pressure in the additional blade system guarantees an extremely clean road surface and economical use of the blades. A 6-piece hydraulic trowel is also available for the MSPN3404, MSPN3704 and MSPN4004. The Easy Fix system of additional blade rubber blades saves time when opening and reattaching the bolts and the blade can be set to the desired height.
Steel-bladed and sturdy base blade that can be used all around year. In summer, the underbody scraper can be used in road construction and maintenance: it is suitable for both spreading filler and levelling the ground and gravel. In winter, the blade is suitable for road maintenance work, such as plowing snow and slush, removing ice and roughening snow. Depending on the order, the underbody scraper can be either fixed or hydraulically rotatable. The Meiren Snow Plow can be equipped with hydraulic extension blades on the right and left, which increase the working width. The height of the plow and the angle of inclination with respect to the road surface are adjustable.
We assembled the underbody scraper AS2507
Meiren Snow patented steel holder made of polyurethane
Introducing the Meiren Snow MSPN Snow Plow