meiren-mskn-aura-konekorjaamo-riikonen-oy

MEIREN MSKN WITH SIDESHIFT

Meiren's MSKN-03 series snow plows are suitable for larger roads, side roads and gravel roads where working conditions are challenging. The blade cutting angle of the snow plow is aggressive, which guarantees lower fuel consumption. The optimized shape of the wing throws snow better at high speeds and in difficult snow conditions. The blade holders are equipped with Meiren's noise reduction system, which also enables copying of the road surface to achieve the best cleaning results. The sideshift of the snow plow makes working comfortable and efficient, especially when using a side plow. Snow plows can be ordered in different heights and shapes depending on the demands of the work. The snow plow can be assembled with a hydraulic slush blade which has the EASY Fix system for attaching the rubber blades.

LIFTING FRAME WITH SIDESHIFT

meiren-mskn-nostorunko-2konekorjaamo-riikonen-oy
meiren-auran-nostorunko-sivusiirto-konekorjaamo-riikonen
meiren-auran-nostorunko-sivusiirto-konekorjaamo-riikonen-oy

The patented lifting frame enables the plow frame to be moved laterally and at the same time the entire plow can also be raised. Sideshift gives the driver more opportunities by moving the front plow. When combined with Meiren's 5.5 m side plow, the working width becomes up to 8.5 m.

SLUSH BLADE MECHANISM

meiren-easy-fix-lisatera-konekorjaamo-riikonen-oy

Meiren's hydraulic 4-block blade distributes the pressure between the front blade and the slush blade. Each block has its own cylinder, which guarantees equal working pressure along the entire length of the slush blade. In the case of hard driven snow, the entire weight of the plow is transferred to the first blade, in the case of slush, the entire weight of the plow is transferred to the slush blade equipped with a rubber blades. Using the right pressure in the slush blade system guarantees an extremely clean road surface and economical use of the blades. For MSKN3403, MSKN3703 and MSKN4003 models, a 6-block hydraulic slush blade is also available. The Easy Fix system of the rubber blades of the slush blade saves time in opening and re-fastening the bolts, and the blade can be set to the desired height. It only takes 5-10 minutes to change or adjust the rubber blades.

meiren-mskn-auran-siipi-konekorjaamo-riikonen

SHAPE AND HEIGHT OF THE MSKN WING

Wings are available in four different models: low wing, standard (mid) wing, high wing and Twin Cone. Different wing heights are available in models MSPN, MSLN and MSKN. In the table, wing height options for MSPN models. MSKN malleihin.

mspn-siiven-malli-normaali-vakio-konekorjaamo-riikonen
mspn-siiven-malli-korkea-twincone-konekorjaamo-riikonen
meiren-mskn-siipi-konekorjaamo-riikonen-oy
meiren-maskn-korkea-siipi-konekorjaamo-riikonen-oy
MODEL OF THE PLOWLOW WING (H)STANDARD WING (H)HIGH WING (H)TWIN CONE (H)
MSKN34031310 mm1530 mm1700 mm1590 mm
MSKN37031300 mm1540 mm1700 mm1600 mm
MSKN40031290 mm1530 mm1680 mm1560 mm

EQUIPMENTS FOR MSKN PLOW

meiren-mskn-aura-siipi-konekorjaamo-riikonen

EQUIPMENTS

  • Patented lifting frame, ready for sideshift
  • Lifting and pivot cylinder
  • Wing partly made of plastic
  • Wing with standard height
  • Fixed, noice resistant blade holders, cutting angle of the blades 40° (regard to vertical)
  • Plow mounting according to the vehicle mounting plate
  • Hydraulic hoses and quick couplers ½” (male)
  • Changeable fixed corner blades
  • Adjustable snowflow guide
  • Hydraulic relief valve with hydraulic accumulator, for pivot cylinder
  • Mechanical support leg (for storage)
  • Meiren safety markings
  • LED marker lights
  • Wear-resistant polyurethane paint, color: Meiren yellow

ACCESSORIES

  • Hydraulic sideshift, max 1200 mm
  • Manual sideshift, max 200 mm
  • Shape of the wing (low, high, twincone)
  • Extra supports for the central part of the wing
  • Side protection (plastic) and/or roll
  • Set of hydraulic accumulators for press or lighten the plow
  • Adjustable skid shoes
  • Adjustable support wheels (not available with slush blade)
  • Hydraulic slush blade mechanism (4 or 6 blocks)
  • Manometer for slush blade
  • Electric directional control valve
  • Wireless switch for directional control valve
  • Electric selector valve (for lifting frame)
  • Frame for tractor or wheel loader attachment (changeable)
  • Blade sets by choice
  • Rubber blade or Hardox rubber blade for slush blade

LIFTING FRAME

The completely unique patented lifting frame enables the plow frame to be moved laterally and at the same time the entire plow can be raised. Sideshift gives the driver more opportunities by moving the front plow. In combination with Meiren's 5.5 m side plow, the working width is up to 8.5 m. The lifting cylinder enables the plow to be lightened or pressed as needed, which guarantees economical use of the blades.

SLUSH BLADE

meiren-lisatera-loskatera-konekorjaamo-riikonen-oy

The 4-block blade distributes the pressure between the front blade and the slush blade. Using the right pressure in the slush blade system guarantees an extremely clean road surface and economical use of the blades. For the MSPN3404, MSPN3704 and MSPN4004 models, a 6-block hydraulic slush blade is also available. With the Easy Fix system, it only takes 5-10 minutes to change or adjust the rubber blades.

CORNER BLADES

The blade of the plow can be equipped with changeable, rigidly attached corner blades, which enable the cleaning of the curbs and the support of the blade against the curbs. The round design of the edges of the corners guarantees smooth cleaning. Available for models MSPN, MSKN and KSM.

MANOMETER

Simple manometer helps you choose the right slush blade pressure to achieve the best plowing results. At the same time, the service life of the blades also increases. Available for models MSPN, MSKN and KSM.

SKID SHOES

meiren-liukujalas-konekorjaamo-riikonen

Adjustable skid shoes prevent excessive wear of the blades on paved roads and gravel roads. The set includes skid shoe with a hard alloy plate and an adjustment mechanism. Available for models MSPN, MSKN, MSLN, KSM, LSPN, TSP02 and VTS02.

SNOWFLOW GUIDE

Snowflow guide is available fixed or adjustable with bolts. Using the guide keeps road signs clear of snow. Available for models MSPN, MSKN, MSLN and KSM-04.

SUPPORT LEG

In the transport position, the lifting frame is placed on the support leg (for storage). The support leg can be ordered either mechanically or hydraulically adjustable. Available for models MSPN, MSLN, MSKN-03, LSPN.

SIDE PROTECTION

The side protection protects the snow plow’s wing. Side protection available as an accessory for models MSPN, MSKN, MSLN and KSM.

SUPPORT WHEELS

Adjustable support wheels reduce excessive wear of the steel blades when cleaning paved roads. The set includes a high-strength rim, an air-filled tire and an adjustment mechanism. Available for models MSPN, MSKN, MSLN, LSPN, TSP02 and VTS02. Cannot be used with a hydraulic slush blade.

BLADE SETS

meiren-auran-terasarjat-konekorjaamo-riikonen-oy

The range includes steel and rubber blades of various sizes as well as installation accessories. Serrated rubber blades are reinforced with a special metal, and they last better than normal rubber blades in difficult conditions. Inside the blade are wear-resistant steel plate segments surrounded by rubber. Serrated rubber blades can be used on all plows instead of a regular rubber blade. 

SPARE PARTS

meiren-varaosat-konekorjaamo-riikonen-oy

You also get all the Meiren spare parts straight from our warehouse or delivered. Ask more about the spareparts from our sales.

TECHNICAL INFORMATIONMSKN3403MSKN 3703MSKN 4003
Overall width (total widht)3998 mm4303 mm4658 mm
Total width of the blades3355 mm3660 mm3965 mm
Min. working width of the blades*2495 mm2737 mm2965 mm
Max. turning angle (left/right)37°/ 42°37°/ 42°37°/ 42°
Cutting angle of the blades (regard to vertical)40°40°40°
Standard height of the wing (left/right)1050/ 1550 mm 1050/ 1550 mm1050/ 1550 mm
Weight with standard equipment980 kg1017 kg1055 kg
Total weight1255 kg1309 kg1366 kg

*Values are achieved with hydraulic sideshift.

CONTROL SYSTEM FOR HYDRAULICS

  • Meiren control system for hydraulic works either with a joystick in the truck's cabin or with a wireless touch screen
  • The touch screen can be used to control the vehicle's hydraulics or to pre-set the hydraulic settings (equipment-specific operating speeds, pressures, etc.)
  • The touch screen is connected to the truck via Bluetooth and can be used outside the cabin, e.g. for installing the front plow or controlling other hydraulics
  • Meiren's touch screen software is an app, so it can be installed on any Android device
  • With Meiren's new control system, it is possible to use the plow's speed-sensitive pressure system

MEIREN MSKN VIDEOS

MEIREN DEMO

Demo for Meiren sifeshift

MEIREN DEMOTRUCK

Meiren plows and underbody scraper

MEIREN CONTROL

Meiren hydraulics control

MEIREN FRONT PLOWS

Functionality of Meiren plow

contact

Ask for more information about our products and services! Add your contact information and tell us which product/service you would like to hear more about or receive an offer. By submitting the form, you agree our privacy statement*. You can also contact us directly by phone, our contact information can be found below! 

KEIJO RIIKONEN

CEO

Gravel superstructures and trailers, work acceptance, workshop and inspection services, tires, plows

EINO HIRVONEN

PRODUCTION ENGINEER

Superstructure product development, production control

JANNE RIIHILUOMA

DESIGN ENGINEER

Superstructure product design, brake calculations

WE ALSO HAVE

en_GBEN