meiren-ksm-sivuaura-konekorjaamo-riikonen-oy

MEIREN KSM SIDE PLOW

Meiren's KSM-04 series side plow is designed for highway maintenance, where the side plow's good cleaning result and low noise level are important. It is possible to improve the cleaning ability by using a hydraulic slush blade system. The patented, road surface copying blade holders smoothly cross obstacles on the road surface. As a special solution, a side plow can be ordered for a hook lift truck with a replacement frame for the spreader and side plow brackets (model KSH). Available series products: KSM1904, KSM3104, KSM3704, KSM4604 and KSM5504.

POLYURETHANE BLADE HOLDER

Meiren's blade holder changes form and moves backwards, allowing the plow to move smoothly over the obstacle. At a speed of 40 km/h, it can easily pass an obstacle up to 12 cm high. The 305 mm long blocks of the blade holders enable the use of different blade lengths (305-1200 mm). Shorter blades follow the road surface the best. Blade holders made of polyurethane reduce the transmission of vibration to the plow body, which results in significantly less noise. The flexible blade holder saves road surface markings. Aggressive blade angle (50°) means less resistance in snow, saving fuel.

HYDRAULIC SLUSH BLADE MECHANISM

KSM-04 series snow plows are designed for highways and paved roads. Snow plows can be used to remove snow from the sides of roads by cutting the ridges of snow piles. The patented elastic polyurethane blade holder moves smoothly over obstacles on the road surface. The KSM04 truck side plow can be equipped with a hydraulic LH slush blade to achieve an optimal working results.

ksm-04-meiren-sivuaura-konekorjaamo-riikonen
TECHNICAL INFORMATIONKSM1904KSM3104KSM3704KSM4604KSM5504
Wing width (total widht)2330 mm3750 mm3970 mm4795 mm5865 mm
Total width of the blades1830 mm3060 mm3660 mm4575 mm5490 mm
Max working widht with corner blades1600 mm2850 mm3100 mm3800 mm4500 mm
Max turning angle56°/ 56°56°56°/ 56°56°/ 56°56°/ 56°
Cutting angle of the blades (regard to vertical)35°35°30°30°30°
Standard height of the wing (outer/inner)1626/ 630 mm1490/ 836 mm1317/ 615 mm1460/ 617 mm1634/ 620 mm
Weight with standard equipment920 kg1076 kg1140 kg1325 kg1435 kg
Total weight1050 kg1210 kg1425 kg1495 kg1805 kg

EQUIPMENTS FOR KSM PLOW

meiren-ksm-kuorma-auton-sivuaura-konekorjaamo-riikonen-oy

EQUIPMENTS

  • Patented blade holders from polyurethane
  • Wing and pivot cylinder set
  • Changeable fixed corner blade
  • Adjustable skid shoe (rear)
  • Adjustable snowflow guide
  • Hydraulic hoses and quick couplers (½”, male)
  • LED marker lights
  • Meiren safety markings
  • Wear-resistant polyurethane paint, color: Meiren yellow

ACCESSORIES

  • Lifting frame and rear mounting beam
  • Hooklift frame with side plow attachment
  • Cylinder for adjusting the wing tilt angle
  • Set of hydraulic accumulators for press or lighten the plow
  • Strobo LED set
  • Electric directional control valve
  • Adjustable skid shoe (front)
  • Hydraulic slush blade
  • Changeable side protection
  • Changeable shock-absorbing side blades
  • Finnish safety markings
  • Set of steel and hard steel blades
  • Rubber blade set for slush blade

ASSEMBLY OF KSM SIDE PLOW

Assembled Meiren KSM5504 side plow. The total width of the wing is 5865 mm, equipped with e.g. polyurethane blade holders, blade set, pivot cylinder, cylinder for lightening/pressing the plow, set for adjusting the blade tilt angle, changeable shock-absorbing side blades, changeable side guard, snow guide with bolts, skid shoe, safety markings, Storbo LED light set, LED marker lights.

CONTROL SYSTEM FOR HYDRAULICS

  • Meiren control system for hydraulic works either with a joystick in the truck's cabin or with a wireless touch screen
  • The touch screen can be used to control the vehicle's hydraulics or to pre-set the hydraulic settings (equipment-specific operating speeds, pressures, etc.)
  • The touch screen is connected to the truck via Bluetooth and can be used outside the cabin, e.g. for installing the front plow or controlling other hydraulics
  • Meiren's touch screen software is an app, so it can be installed on any Android device
  • With Meiren's new control system, it is possible to use the plow's speed-sensitive pressure system

contact

Ask for more information about our products and services! Add your contact information and tell us which product/service you would like to hear more about or receive an offer. By submitting the form, you agree our privacy statement*. You can also contact us directly by phone, our contact information can be found below! 

KEIJO RIIKONEN

CEO

Gravel superstructures and trailers, work acceptance, workshop and inspection services, tires, plows

EINO HIRVONEN

PRODUCTION ENGINEER

Superstructure product development, production control

JANNE RIIHILUOMA

DESIGN ENGINEER

Superstructure product design, brake calculations

WE ALSO HAVE

en_GBEN