Open mon-fri
7.00 - 16.00
Open mon-fri
7.00 - 16.00
Meiren's KSM-04 series side plow is designed for highway maintenance, where the side plow's good cleaning result and low noise level are important. It is possible to improve the cleaning ability by using a hydraulic slush blade system. The patented, road surface copying blade holders smoothly cross obstacles on the road surface. As a special solution, a side plow can be ordered for a hook lift truck with a replacement frame for the spreader and side plow brackets (model KSH). Available series products: KSM1904, KSM3104, KSM3704, KSM4604 and KSM5504.
Meiren's blade holder changes form and moves backwards, allowing the plow to move smoothly over the obstacle. At a speed of 40 km/h, it can easily pass an obstacle up to 12 cm high. The 305 mm long blocks of the blade holders enable the use of different blade lengths (305-1200 mm). Shorter blades follow the road surface the best. Blade holders made of polyurethane reduce the transmission of vibration to the plow body, which results in significantly less noise. The flexible blade holder saves road surface markings. Aggressive blade angle (50°) means less resistance in snow, saving fuel.
KSM-04 series snow plows are designed for highways and paved roads. Snow plows can be used to remove snow from the sides of roads by cutting the ridges of snow piles. The patented elastic polyurethane blade holder moves smoothly over obstacles on the road surface. The KSM04 truck side plow can be equipped with a hydraulic LH slush blade to achieve an optimal working results.
TECHNICAL INFORMATION | KSM1904 | KSM3104 | KSM3704 | KSM4604 | KSM5504 |
---|---|---|---|---|---|
Wing width (total widht) | 2330 mm | 3750 mm | 3970 mm | 4795 mm | 5865 mm |
Total width of the blades | 1830 mm | 3060 mm | 3660 mm | 4575 mm | 5490 mm |
Max working widht with corner blades | 1600 mm | 2850 mm | 3100 mm | 3800 mm | 4500 mm |
Max turning angle | 56°/ 56° | 56° | 56°/ 56° | 56°/ 56° | 56°/ 56° |
Cutting angle of the blades (regard to vertical) | 35° | 35° | 30° | 30° | 30° |
Standard height of the wing (outer/inner) | 1626/ 630 mm | 1490/ 836 mm | 1317/ 615 mm | 1460/ 617 mm | 1634/ 620 mm |
Weight with standard equipment | 920 kg | 1076 kg | 1140 kg | 1325 kg | 1435 kg |
Total weight | 1050 kg | 1210 kg | 1425 kg | 1495 kg | 1805 kg |
Assembled Meiren KSM5504 side plow. The total width of the wing is 5865 mm, equipped with e.g. polyurethane blade holders, blade set, pivot cylinder, cylinder for lightening/pressing the plow, set for adjusting the blade tilt angle, changeable shock-absorbing side blades, changeable side guard, snow guide with bolts, skid shoe, safety markings, Storbo LED light set, LED marker lights.
contact
Ask for more information about our products and services! Add your contact information and tell us which product/service you would like to hear more about or receive an offer. By submitting the form, you agree our privacy statement*. You can also contact us directly by phone, our contact information can be found below!
CEO
Gravel superstructures and trailers, work acceptance, workshop and inspection services, tires, plows
PRODUCTION ENGINEER
Superstructure product development, production control
DESIGN ENGINEER
Superstructure product design, brake calculations
Follow us
CONTACT
OPENING HOURS
Open Mon-Fri from 07:00 to 16:00
KONEKORJAAMO RIIKONEN OY
Helatie 19, 80100 Joensuu, FINLAND
BIC FI25834255
EMAILS
firstname.lastname@riiko.fi
Konekorjaamo Riikonen is a heavy machinery workshop and RIIKO® Superstructure manufacturer - founded in 1981.
© 2024 KONEKORJAAMO RIIKONEN OY