MEIREN MSPN WITH SIDESHIFT

Meiren's MSPN-04 serie snow plows are suitable for highways and cities, where excellent cleaning results and low noise levels are important. Ultra-quiet, patented blade holders made of polyurethane move smoothly over obstacles on the road surface. The lifting frame of the snow plow is equipped with a patented sideshift. It gives the driver significantly greater possibilities in handling the plow and helps to plow the area as efficiently as possible. The snow plow can be equipped with a hydraulic slush blade mechanism which has EASY Fix system for attaching the rubber blades. Available series products: MSPN3104, MSPN3404, MSPN3704, MSPN4004, MSPN4604 and MSPN5204.

POLYURETHANE BLADE HOLDER

Meiren's blade holder changes form and moves backwards, allowing the plow to move smoothly over the obstacle. At a speed of 40 km/h, it can easily pass an obstacle up to 12 cm high. The 305 mm long blocks of the blade holders enable the use of different blade lengths (305-1200 mm). Shorter blades follow the road surface the best. Blade holders made of polyurethane reduce the transmission of vibration to the plow body, which results in significantly less noise. The flexible blade holder saves road surface markings. Aggressive blade angle (50°) means less resistance in snow, saving fuel.

LIFTING FRAME WITH SIDESHIFT

The patented lifting frame with sideshift enables the plow body to be moved laterally and at the same time also to raise the entire plow. Sideshift gives the driver more opportunities by moving the front plow. When combined with Meiren's 5.5 m side plow, the working width becomes up to 8.5 m. The lifting cylinder enables the plow to be lightened or pressed as needed, which guarantees extremely economical use of the blades. The plowing of the road surface and the slush blade guarantee a clean road surface in one ploughing, reducing the need to use salt.

SLUSH BLADE MECHANISM

Meiren's hydraulic 4-block slush blade distributes the pressure between the front blade and the slush blade. Each block has its own cylinder, which guarantees equal working pressure along the entire length of the slush blade. In the case of hard driven snow, the entire weight of the plow is transferred to the first blade, in the case of slush, the whole weight is transferred to the slush blade equipped with a rubber blade. Using the correct pressure in the slush blade system guarantees an extremely clean road surface and economical use of the blades. For the MSPN3404, MSPN3704 and MSPN4004 models, a 6-block hydraulic scraper is also available. The Easy Fix system of the rubber blades of the slush blade saves time in opening and re-fastening the bolts, and the blade can be set to the desired height. It only takes 5-10 minutes to change or adjust the rubber blades.

SHAPE AND HEIGHT OF THE MPSN WING

Wings are available in four different models: low wing, standard (mid) wing, high wing and Twin Cone. Different wing heights are available in models MSPN, MSLN and MSKN. In the table, wing height options for MSPN models. MSPN malleihin.

MODEL OF THE PLOW	LOW WING (H)	STANDARD WING (H)	HIGH WING (H)	TWIN CONE (H)
MSPN3104	1130 mm	1360 mm	1500 mm	1500 mm
MSPN3404	1320 mm	1550 mm	1700 mm	1580 mm
MSPN3704	1320 mm	1550 mm	1710 mm	1570 mm
MSPN4004	1310 mm	1520 mm	1690 mm	1580 mm
MSPN4604	1300 mm	1530 mm	1670 mm	-
MSPN5204	1130 mm	1550 mm	-	-

EQUIPMENTS FOR MSPN PLOW

EQUIPMENTS

Patented lifting frame, ready for sideshift
Lifting and pivot cylinder
Wing partly made of plastic
Wing with standard height
Patented polyurethane blade holders
Plow mounting according to the vehicle mounting plate
Hydraulic hoses and quick couplers ½” (male)
Changeable fixed corner blades
Adjustable snowflow guide
Hydraulic relief valve with hydraulic accumulator, for pivot cylinder
Mechanical support leg (for storage)
Meiren safety markings
LED marker lights
Wear-resistant polyurethane paint, color: Meiren yellow

ACCESSORIES

Hydraulic sideshift, max 1200 mm
Manual sideshift, max 200 mm
Shape of the wing (low, high, twincone)
Extra supports for the central part of the wing
Changeable shock-absorbing side blades
Side protection (plastic)
Set of hydraulic accumulators for press or lighten the plow
Adjustable skid shoes
Adjustable support wheels (not available with slush blade)
Hydraulic slush blade mechanism (4 or 6 blocks)
Manometer for slush blade
Electric directional control valve
Wireless switch for directional control valve
Electric selector valve (for lifting frame)
Attachments for tractor
Hydraulic snow stopper
Blade sets by choice
Rubber blade set for slush blade

LIFTING FRAME

The completely unique patented lifting frame enables the plow frame to be moved laterally and at the same time the entire plow can be raised. Sideshift gives the driver more opportunities by moving the front plow. In combination with Meiren's 5.5 m side plow, the working width is up to 8.5 m. The lifting cylinder enables the plow to be lightened or pressed as needed, which guarantees economical use of the blades.

BLADE HOLDER

At an obstacle, blade holder changes form and moves backwards, allowing the plow to move smoothly over the obstacle. The 305 mm long blocks of the blade holders enable the use of different blade lengths (305-1200 mm). Shorter blades follow the road surface the best. At a speed of 40 km/h, the blade holder can easily cross an obstacle up to 12 cm high. Available for models MSPN, MSLN and KSM-04.

SLUSH BLADE

The 4-block blade distributes the pressure between the front blade and the slush blade. Using the right pressure in the slush blade system guarantees an extremely clean road surface and economical use of the blades. For the MSPN3404, MSPN3704 and MSPN4004 models, a 6-block hydraulic slush blade is also available. With the Easy Fix system, it only takes 5-10 minutes to change or adjust the rubber blades.

CORNER BLADES

The blade of the plow can be equipped with changeable, rigidly attached corner blades, which enable the cleaning of the curbs and the support of the blade against the curbs. The round design of the edges of the corners guarantees smooth cleaning. Available for models MSPN, MSKN and KSM.

SIDE BLADES

Instead of changeable side blades, available as an accessory are changeable two-part side blades. The upper blade is mounted on the plow wing and the lower one on the outermost blade holders made of polyurethane. When the main blade meets an obstacle, the lowest side blade attached to the blade supports moves backwards together with the main blade and makes it easier to overcome the obstacle. Available for models MSPN, MSLN, KSM-04.

SNOW STOPPER

The plow is available with a hydraulic snow stopper for cleaning junctions and crossroads. The snow stopper interrupts the flow of snow to the side, preventing the formation of snow banks.

MANOMETER

Simple manometer helps you choose the right slush blade pressure to achieve the best plowing results. At the same time, the service life of the blades also increases. Available for models MSPN, MSKN and KSM.

SKID SHOES

Adjustable skid shoes prevent excessive wear of the blades on paved roads and gravel roads. The set includes skid shoe with a hard alloy plate and an adjustment mechanism. Available for models MSPN, MSKN, MSLN, KSM, LSPN, TSP02 and VTS02.

SNOWFLOW GUIDE

Snowflow guide is available fixed or adjustable with bolts. Using the guide keeps road signs clear of snow. Available for models MSPN, MSKN, MSLN and KSM-04.

SUPPORT LEG

In the transport position, the lifting frame is placed on the support leg (for storage). The support leg can be ordered either mechanically or hydraulically adjustable. Available for models MSPN, MSLN, MSKN-03, LSPN.

SIDE PROTECTION

The side protection protects the snow plow’s wing. Side protection available as an accessory for models MSPN, MSKN, MSLN and KSM.

SUPPORT WHEELS

Adjustable support wheels reduce excessive wear of the steel blades when cleaning paved roads. The set includes a high-strength rim, an air-filled tire and an adjustment mechanism. Available for models MSPN, MSKN, MSLN, LSPN, TSP02 and VTS02. Cannot be used with a hydraulic slush blade.

BLADE SETS

The range includes steel and rubber blades of various sizes as well as installation accessories. Serrated rubber blades are reinforced with a special metal, and they last better than normal rubber blades in difficult conditions. Inside the blade are wear-resistant steel plate segments surrounded by rubber. Serrated rubber blades can be used on all plows instead of a regular rubber blade.

SPARE PARTS

You also get all the Meiren spare parts straight from our warehouse or delivered. Ask more about the spareparts from our sales.

TECHNICAL INFORMATION	MSPN 3104	MSPN 3404	MSPN 3704	MSPN 4004	MSPN 4604	MSPN 5204
Overall width (total widht)	3400 mm	3400 mm	4140 mm	4680 mm	5290 mm	5900 mm
Total width of the blades	3070 mm	3370 mm	3680 mm	3990 mm	4600 mm	5213 mm
Min. working width of the blades*	2290 mm	2505 mm	2730 mm	2960 mm	3400 mm	3900 mm
Max. turning angle (left/right)	37°/ 42°	37°/ 42°	37°/ 42°	37°/ 42°	37°/ 42°	37°/ 42°
Cutting angle of the blades (regard to vertical)	20°	20°	20°	30°	30°	30°
Standard height of the wing (left/right)	1100/ 1360 mm	1070/ 1560 mm	1070/ 1560 mm	1060/ 1540 mm	1070/ 1540 mm	1050/ 1560 mm
Weight with standard equipment	870 kg	960 kg	1020 kg	1075 kg	1150 kg	1240 kg
Total weight	1085 kg	1275 kg	1345 kg	1475 kg	1570 kg	1650 kg

*Values are achieved with hydraulic sideshift.

Assembly of Meiren front plow

Assembled Meiren MSPN3704 front plow for city road maintenance. Plow equipment: twin cone wing, height right side approx. 1500 mm; lifting frame with sideshift; replaceable polyurethane blade holders; hard metal blades; blade working width 2730-3680 mm; blade cutting angle +20°; safety valve for turning cylinder; mechanical support leg; security markings; LED strobo lights.

CONTROL SYSTEM FOR HYDRAULICS

Meiren control system for hydraulic works either with a joystick in the truck's cabin or with a wireless touch screen
The touch screen can be used to control the vehicle's hydraulics or to pre-set the hydraulic settings (equipment-specific operating speeds, pressures, etc.)
The touch screen is connected to the truck via Bluetooth and can be used outside the cabin, e.g. for installing the front plow or controlling other hydraulics
Meiren's touch screen software is an app, so it can be installed on any Android device
With Meiren's new control system, it is possible to use the plow's speed-sensitive pressure system

MSPN FRONT PLOW FOR TRACTOR

The Meiren MSPN front plow with sideshift is also available with a tractor attachment.

contact

Ask for more information about our products and services! Add your contact information and tell us which product/service you would like to hear more about or receive an offer. By submitting the form, you agree our privacy statement*. You can also contact us directly by phone, our contact information can be found below!