Meiren's MSLN-04 series light snow plows are designed for areas with little snow and medium-sized trucks (10.0 - 18.0 t). Snow plows are suitable for paved roads, such as highways, in cities and near cities, where good clearing results and low noise levels are important. Patented, road surface copying blade holders smoothly cross obstacles on the road surface and also enable road surface copying to achieve the best cleaning results. The sideshift of the snow plow makes working comfortable and efficient, especially when using a side plow. Snow plows can be ordered in different heights and shapes depending on the demands of the work. Available series products: MSLN3404, MSLN3704 and MSLN4004.
Meiren's blade holder changes form and moves backwards, allowing the plow to move smoothly over the obstacle. At a speed of 40 km/h, it can easily pass an obstacle up to 12 cm high. The 305 mm long blocks of the blade holders enable the use of different blade lengths (305-1200 mm). Shorter blades follow the road surface the best. Blade holders made of polyurethane reduce the transmission of vibration to the plow body, which results in significantly less noise. The flexible blade holder saves road surface markings. Aggressive blade angle (50°) means less resistance in snow, saving fuel.
The patented lifting frame with sideshift enables the plow body to be moved laterally and at the same time also to raise the entire plow. Sideshift gives the driver more opportunities by moving the front plow. When combined with Meiren's 5.5 m side plow, the working width becomes up to 8.5 m. The lifting cylinder enables the plow to be lightened or pressed as needed, which guarantees extremely economical use of the blades. The plowing of the road surface and the slush blade guarantee a clean road surface in one ploughing, reducing the need to use salt.
Different wing heights are available in models MSPN, MSLN and MSKN. In the table, wing height options for MSLN models. MSLN malleihin.
MODEL OF THE PLOW | LOW WING (H) | STANDARD WING (H) | HIGH WING (H) | TWIN CONE (H) |
---|---|---|---|---|
MSLN3704 | - | 1120 mm | 1270 mm | - |
MSLN4004 | - | 1120 mm | 1280 mm | - |
The completely unique patented lifting frame enables the plow frame to be moved laterally and at the same time the entire plow can be raised. Sideshift gives the driver more opportunities by moving the front plow. In combination with Meiren's 5.5 m side plow, the working width is up to 8.5 m. The lifting cylinder enables the plow to be lightened or pressed as needed, which guarantees economical use of the blades.
At an obstacle, blade holder changes form and moves backwards, allowing the plow to move smoothly over the obstacle. The 305 mm long blocks of the blade holders enable the use of different blade lengths (305-1200 mm). Shorter blades follow the road surface the best. At a speed of 40 km/h, the blade holder can easily cross an obstacle up to 12 cm high. Available for models MSPN, MSLN and KSM-04.
Instead of changeable side blades, available as an accessory are changeable two-part side blades. The upper blade is mounted on the plow wing and the lower one on the outermost blade holders made of polyurethane. When the main blade meets an obstacle, the lowest side blade attached to the blade supports moves backwards together with the main blade and makes it easier to overcome the obstacle. Available for models MSPN, MSLN, KSM-04.
Adjustable skid shoes prevent excessive wear of the blades on paved roads and gravel roads. The set includes skid shoe with a hard alloy plate and an adjustment mechanism. Available for models MSPN, MSKN, MSLN, KSM, LSPN, TSP02 and VTS02.
Snowflow guide is available fixed or adjustable with bolts. Using the guide keeps road signs clear of snow. Available for models MSPN, MSKN, MSLN and KSM-04.
The range includes steel and rubber blades of various sizes as well as installation accessories. Serrated rubber blades are reinforced with a special metal, and they last better than normal rubber blades in difficult conditions. Inside the blade are wear-resistant steel plate segments surrounded by rubber. Serrated rubber blades can be used on all plows instead of a regular rubber blade.
In the transport position, the lifting frame is placed on the support leg (for storage). The support leg can be ordered either mechanically or hydraulically adjustable. Available for models MSPN, MSLN, MSKN-03, LSPN.
The side protection protects the snow plow’s wing. Side protection available as an accessory for models MSPN, MSKN, MSLN and KSM.
Adjustable support wheels reduce excessive wear of the steel blades when cleaning paved roads. The set includes a high-strength rim, an air-filled tire and an adjustment mechanism. Available for models MSPN, MSKN, MSLN, LSPN, TSP02 and VTS02. Cannot be used with a hydraulic slush blade.
You also get all the Meiren spare parts straight from our warehouse or delivered. Ask more about the spareparts from our sales.
TECHNICAL INFORMATION | MSLN3404 | MSLN3704 | MSLN4004 |
---|---|---|---|
Suitable for vehicles with actual weight as | alle 18 t | alle 18 t | alle 18 t |
Overall width (total widht) | 3650 mm | 3950 mm | 4250 mm |
Total width of the blades | 3370 mm | 3680 mm | 3990 mm |
Min. working width of the blades* | 2525 mm | 2750 mm | 2975 mm |
Max. turning angle (left/right) | 37°/ 42° | 37°/ 42° | 37°/ 42° |
Cutting angle of the blades (regard to vertical) | 25° | 25° | 25° |
Standard height of the wing (left/right) | 900/ 1130 mm | 910/ 1120 mm | 910/ 1110 mm |
Weight with standard equipment | 850 kg | 895 kg | 940 kg |
Total weight | 960 kg | 1010 kg | 1060 kg |
*Values are achieved with hydraulic sideshift.
contact
Ask for more information about our products and services! Add your contact information and tell us which product/service you would like to hear more about or receive an offer. By submitting the form, you agree our privacy statement*. You can also contact us directly by phone, our contact information can be found below!
CEO
Gravel superstructures and trailers, work acceptance, workshop and inspection services, tires, plows
PRODUCTION ENGINEER
Superstructure product development, production control
DESIGN ENGINEER
Superstructure product design, brake calculations
Follow us
CONTACT
OPENING HOURS
Open Mon-Fri from 07:00 to 16:00
KONEKORJAAMO RIIKONEN OY
Helatie 19, 80100 Joensuu, FINLAND
BIC FI25834255
EMAILS
firstname.lastname@riiko.fi
Konekorjaamo Riikonen is a heavy machinery workshop and RIIKO® Superstructure manufacturer - founded in 1981.
© 2024 KONEKORJAAMO RIIKONEN OY